Select Page

3 Surefire Methods of Keeping the Leakage Off Your Chimney

Kyle Brink

12 June 2017

When the spring season begins, many chimney contractors will typically receive a lot of calls asking about leakage on the chimney. Majority of leaking chimneys are caused by a number of triggers; therefore, you might want to become familiarized with some of the common preventative plan actions.

#1. Use a cover. An easy solution that protects the chimney is by installing a special cap that acts as a cover for your chimney. A majority of homes are readily built with these caps; however, there are still many homeowners who are not aware of the significance of installing them. The cap can also keep wildlife from creating their nests in the flue. It keeps water from dripping right into the chimney. At the same time, it prevents the immersion of water from the inner parts of the chimney bricks.

#2. Use a sealant. A chimney is susceptible to cracks in three parts. In order to prevent these cracks from occurring, the use of sealant is crucial. Take note that the crown, which is the intersection where the flue and brick chimney meet is susceptible to cracks due to frozen and thawing water all year round. Although the initial crack can be small in size, over time it can grow in size and develop into a number of cracks. A great preventative measure is to check the intersection on a frequent basis and use sealant to prevent small cracks from growing.

The second area that is susceptible to crack is the flashing. Flashing is comprised of a mixture of tar and metal and it acts as a sealant that secures the roof right up to the chimney. Generally, the flashing comes in the form of aluminum panes and these are applied to both the roof and chimney. Over time, the sealant (tar) that holds the panes in place could be worn out. As a result, cracks will appear and water will drop down through them. These days, due to advanced technology in chemical production, a more durable version of tar has been produced and it acts as a much stronger sealant.

The third area where cracks are prone to develop is the chimney’s brick structure. Bricks can get worn out over time and allow water to penetrate deep within the internal parts of the chimney and create a lot of problems related to leakage. Even though the technique of sealing the brick from water is popularly known, many homeowners are not aware that more than one technique is available to choose from. Asking an expert roofer to carry out the mortar absorption inspection helps in determining the right kind of sealant to be used to eradicate your problem.

#3. Treat Condensation Problems While They’re Still New. Many homeowners tend to overlook the actual liner located at the chimney’s internal area. When an upgrade is done for the fireplace many homeowners do not bother to upgrade the entire chimney to accommodate to the likelihood of new resistance level. Major interior damage may occur out of this negligence. Still, many homeowners are not aware of the root cause of their problem and tend to spend a small fortune in order to come up with possible diagnoses. If you don’t want to end up being like a majority of homeowners, it’s a wiser act to call a credible chimney contractor and ask them to fix your problem for good.